The short version: a period-style home in Maldon, Essex, with PVC sash windows at the front and newer PVC windows at the back. The customer wanted to stop her new sofa fading without changing the look of the house, so we fitted 3M Prestige 70 Exterior to 10 panes. It’s almost clear, rejects 61% of the sun’s heat through clear double glazing, blocks 99.9% of UV and cuts fading by around 65%. I checked the glass on the survey, and the install took 3 to 4 hours.
We are an Essex-based window film installation company, fitting solar, privacy, safety and decorative film to homes and commercial buildings across Essex and London.
What is 3M Prestige 70?
If you haven’t come across it before, Prestige 70 is one of the most talked-about window films in the world. It’s part of 3M’s Prestige Exterior range, and it’s what’s known as a clear film.
I first used it during my training at the 3M centre in Bracknell, and I distinctly remember two things. Firstly, it smells really bad. Secondly, I thought it looked really cool. Yes, childish, I know.
Here’s why it matters. Once it’s on the glass, Prestige 70 looks almost clear, but it still keeps out a big chunk of the sun’s heat and nearly all of the UV.
People tend to switch off when I say “infrared” and “UV”. They start to get interested when I tell them the exterior version rejects 61% of the sun’s heat, blocks 99.9% of UV (the main cause of fading) and cuts fading by around 65%, while staying practically clear.
At least this customer did.
| What it does on clear double glazing | Prestige 70 Exterior | No film |
|---|---|---|
| Light let through | 63% | 78% |
| Sun’s heat rejected | 61% | 30% |
| Light reflected on the outside | 12% | 14% |
Figures from 3M’s product bulletin for Prestige 70 Exterior, measured to EN 410.
Why did the customer choose an almost clear film?
Because of the house. It looks fairly old, similar to a Georgian house, with beautiful PVC sash windows on the front and newer square PVC windows on the back. A tinted or mirrored film would have changed the look of it completely.
I get this a lot. Some customers specifically ask for something reflective. Others are really concerned about how it looks, or how much light it lets in.
Which is fair enough really.
Her main worry was her new sofa fading. Once she saw the figures, it made total sense to go ahead.

What did the survey check?
The glass. Before recommending anything, I made sure the outer pane was toughened.
Some people may beg to differ, but you could probably get away with Prestige 70 on most glass because it’s such a light film. The darker versions, Prestige 40 and 20, absorb a lot more of the sun’s energy. I wouldn’t put those on laminated or annealed glass without a proper check, because that extra heat can crack the glass through thermal stress. 3M’s own sheet for Prestige 20 recommends toughened glass.
How did the installation go?
Well. The customer was very friendly, and it’s always a bonus when the job is just down the road.
I also got to use my new keg from TRÜ Spray, and it’s been a game changer, especially for cleaning the glass. My old keg had plastic fittings that gave me trouble. This one has brass fittings and a lightweight body, which makes it a walk in the park.
We cut the film to size, I find cutting to size leads to less contamination on external as you are not cutting on dirty frames, and it makes the day quicker.
If the frames are uneven when I measure, I cut the film to the largest measurement, so there’s as little trimming on the glass as possible. That’s taken a lot of practice, but it pays off when you get it right.
We kept everything clean, took minimal breaks and cracked on. With 10 panes, it took us around 3 to 4 hours, which is good going for an exterior film.

What did the customer say?
Here’s the review she left us on Trustpilot:
Great service from this company
“Great service from this company. George was professional, helpful and inspired confidence at the quotation stage and the guys did an excellent job fitting the window films. Clean, respectful, very professional with attention to detail. Cannot see even the tiniest flaw in the finished result. Really pleased and would highly recommend.”
It always feels nice to come back to this.
Things people ask me about Prestige 70
Can you tell it’s on the glass?
Barely. On clear double glazing it lets through 63% of the light, against 78% with no film, and it reflects slightly less than bare glass. There’s no mirror look and no dark tint, so from the street you’d struggle to see it’s there.
Will it stop my furniture fading completely?
No film stops fading completely. Prestige 70 blocks 99.9% of UV, the main cause, and cuts fading by around 65%, but visible light plays a part too. What it does is slow fading right down, which is why it suits someone protecting a new sofa, a wooden floor or artwork.
Should it go on the inside or the outside of the glass?
On double glazing, the outside if you can. 3M’s figures for clear double glazing show the exterior version rejecting 61% of the sun’s heat, against 44% for the interior version, because it stops the heat before it gets into the home. The interior version is still a good option where the outside can’t be reached safely.
Want the same for your home?
Send us a few photos and rough measurements through our quick estimate form. You’ll get a rough estimate within 24 hours on weekdays.
Got your measurements to hand? Try our free online estimator for a rough price straight away.
We survey every job before giving a final price, so both are a guide rather than a fixed quote.



